You can create automatic tftp bindings for all phone firmware instead of doing it manually one by one by using the “load” command under “telephony-service”. Make sure you include the firmware file suffix in order to make the tftp binding automatically. Without the suffix you need to configure it manually with the command “tftp-server flash:xxxx.loads”, etc.
load 7962 SCCP42.8-4-2S.loadsYou might see this error after issuing the above load command:
LOAD COMMAND ERROR:cnf-file location system is not supported for creating automatic tftp bindings. Please use file location flash | slot0 | tftp OR create tftp bindings manually
Make sure you’ve entered the command “cnf-file location flash:” under “telephony-service” to specify the firmware location, then the error will go away!
An iPhone app for CME Config Generation: